In an electrical circuit the function of a breaker is to ? Understand > operation Protect system in event of overload, maintain current intensity at a constant value, permit to open close circuit, limit any overcurrent.
With regards to launcher / catapult safety areas the operator must refer to the ? With regards to launcher / catapult safety areas operator must refer to Manufacturer's operating manual, industry canada safety manual, canadian aviation regulations gen section, transport canada guide on catapult safety.
During pre flight inspection you notice that the battery presents a defect swelling split nick or a tear of the casing containing the elements etc In that case you should ? During pre flight inspection you notice that battery presents a defect swelling split nick or a tear of casing containing elements etc in that case you should Follow manufacturer's guidance, add tape to secure envelope, decrease planned flight time to avoid overheating, decrease planned flight height to reduce risks associated with a power failure.
The anemometer airspeed indicator may indicate an incorrect speed if it exposed to A swarm of flying insects, rain, a very cold outside temperature ( 4 °c), a very hot outside temperature (+4 °c).
Electrical conductivity The ability of a material to carry flow of an electric current, the power delivered a battery one hour, the resistivity of a material, the voltage delivered a battery one hour.
Electrical power expressed in Watt, volt, ampere, ohm.
The minimum operating voltage of a lipo battery 3.7 volts, 3.2 volts, 3.4 volts, 7.3 volts.
Question Section 2: Airframes, power plants 47 Answer 8 The embedded microprogram in an electronic system of a remotely piloted aircraft but also in its radio control unit ground station and possibly in some batteries called Firmware, hardware, cpu (central processing unit), register.
Question Section 2: Airframes, power plants 47 Answer 9 The element s that do not affect compass accuracy are The outside temperature, batteries, engines, electronic speed controllers (esc).
Question Section 2: Airframes, power plants 47 Answer 10 The role of electronic speed controller esc To control speed of rotation of motors, to power flight controller, to regulate ascent speed of remotely piloted aircraft, to regulate voltage of battery.
Question Section 2: Airframes, power plants 47 Answer 11 Current small rpa's operating within line of sight generally use following frequency flight control 2.4 ghz, 5.8 ghz,.2 ghz, 3 mhz.
Question Section 2: Airframes, power plants 47 Answer 12 When one engine fails on an 8 engines drone octocopter aircraft Normally responds to pilot commands, goes into rth mode returns to recorded starting point, is out of control descends to ground, descends into control lands normally without pilot intervention.
Question Section 2: Airframes, power plants 47 Answer 13 To update your drone firmware recommended battery level should be at least before updating
Question Section 2: Airframes, power plants 47 Answer 14 Maintenance and record keeping servicing operations Are to be performed on entire aircraft its accessories, only concern engines propellers, are only performed on parts that may break, are desirable but not mandatory.
Question Section 2: Airframes, power plants 47 Answer 15 Maintenance and record keeping for technical record keeping of a drone you do not have to note The total flight hour of your aircraft since first flight, the names of pilots other crew members who are involved in each flight, the time of each flight or series of flights, the particulars of any mandatory action any other maintenance action.
Exclusive rights reserved. Reproduction prohibited under penalty of prosecution. 689 Free Training Exam Other source study: Codebateau examen 47